Chevalier Large Frame VMCs

SPECIFICATIONS	FVM 80 x 125	FVM 80 x 160	FVM 104 x 125	FVM 104 x 160
Table Size	70.85" x 125"	70.85" x 160"	104" x 126"	104" x 160"
Maximum Table Load	22046lbs	22046lbs	22200lbs	28600lbs
XYZ Travel	118 x 78.75 x 139	118 x 102 x 39	157 x 78.75 x 39	157 x 102 x 39
Spindle Motor	25HP	25HP	25HP	25HP
Spindle Speed	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm
Spindle Nose to Table	49.21	49.21	49.21	49.21
XYZ Rapids	394/394/471ipm	394/394/471ipm	394/394/471ipm	394/394/471ipm
Cutting Feedrate	0.04-276ipm	0.04-276ipm	0.04-276ipm	0.04-276ipm
Ballscrew Class/Diameter	C3/3.15"	C3/3.15"	C3/3.15"	C3/3.15"
Servo Motor	5.25HP	5.25HP	5.25HP	5.25HP
Tool Capacity	40 arm type opt 60	40 arm type opt 60	40 arm type opt 60	40 arm type opt 60
Max Tool Dia w/ Adj Tool/ W/o Adj Tool	5"/8.45"	5"/8.45"	5"/8.45"	5"/8.45"
Maximum Tool Length/Weight	13.75"/44lbs	13.75"/44lbs	13.75"/44lbs	13.75"/44lbs
Tool Change Time: Tool-to-tool	6.0 secs	6.0 secs	6.0 secs	6.0 secs
Shipping Weight	88,000lbs	info not available yet	92,594lbs	138,891lbs


SPECIFICATIONS	FVM 104 x 200	FVM 104 x 240	FVM 130 x 200	FVM 130 x 240
Table Size	104 x 204.75	104 x 240	130 x 200	130 x 240
Maximum Table Load	33069lbs	info not available yet	info not available yet	info not available yet
XYZ Travel	197 x 102 x 39	236 x102 x 39	1967 x 130 x 39	236 x 130 x 39
Spindle Motor	25HP	25HP	25HP	25HP
Spindle Speed	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm	6,00rpm opt 8,000/10,000rpm
Spindle Nose to Table	49.21	49.21	49.21	49.21
XYZ Rapids	394/394/471ipm	394/394/471ipm	394/394/471ipm	394/394/471ipm
Cutting Feedrate	0.04-276ipm	0.04-276ipm	0.04-276ipm	0.04-276ipm
Ballscrew Class/Diameter	C3/3.15"	C3/3.15"	C3/3.15"	C3/3.15"
Servo Motor	5.25HP	5.25HP	5.25HP	5.25HP
Tool Capacity	40 arm type opt 60	40 arm type opt 60	40 arm type opt 60	40 arm type opt 60
Max Tool Dia w/ Adj Tool/ W/o Adj Tool	5"/8.45"	5"/8.45"	5"/8.45"	5"/8.45"
Maximum Tool Length/Weight	13.75"/44lbs	13.75"/44lbs	13.75"/44lbs	13.75"/44lbs
Tool Change Time: Tool-to-tool	6.0 secs	6.0 secs	6.0 secs	6.0 secs
Shipping Weight	149,914lbs	info not available yet	info not available yet	info not available yet

CHEVALIER MACHINERY, INC.
9925 Tabor Place
Santa Fe Springs, CA 90670
TEL 562/903-1929 or 800/243-8253
FAX 562/903-3959
E-mail: info@chevalierusa.com

BIG MACHINES FOR BIG JOBS - INTRODUCING LARGE FRAME VMCS FOR MACHINING WORKPIECES UP TO 9,920LBS!
Built mainly for large part machining, yet accurate enough to mill intricately designed workpieces. BUY THIS MACHINE IN 2008 AND CLAIM A TAX WRITE-OFF OF AT LEAST $250,000!
Solid Meehanite cast iron casting. Extra wide machine base and column. Double anchored, hollow ballscrews with oil circulation.
4 slide ways on regular frame machines; 6 slideways on bigger models.
Generous work envelope with 40 tool ATC. Sloped surfaces prevent chip buildup.
Hollow ballscrews permit oil circulation. Temperature sensor monitors any change in ballscrew temperature, threreby preventing thermal expansion.
Dual auger system with high volume coolant washdown ensure that all chips are swept to the conveyor system.
High pressure, fully filtered, through-spindle coolant system available in all models. STANDARD: Fanuc 18iMB w. AI Advanced Preview Control & Data Server; 25HP 50 taper air purged spindle; chip flushing system; spindle oil cooler; 4th axis prep (pre-wire only, excl drivers); 1,000psi coolant-thru-spindle prep; automatic lubrication system and fully enclosed splash guard